Installing The Appliance In The Recess - V-ZUG Cooler V200 Notice D'installation

Fig. 14
u Reposition the screws for the hinge fastening. Do not
screw in all the way after repositioning, the hinges must
be hooked in later.
Fig. 15
u Swap the mounting bracket to the opposite side.
Fig. 16
u Rotate all hinges by 180° on the opposite side and screw
tight.
* Depending on model and options

Installing the appliance in the recess

Fig. 17
u Fitting the door again: Hang the door in the hinges and
tighten the screws.
Fig. 18
u Reattaching the soft stop mechanism: Screw in the ball
studs (1), tighten the retainer (2) and attach the soft stop
mechanism to the ball studs.
u Check all screws and retighten them if necessary.
Fig. 19
u Refit the cover at the bottom and centre. Only fit the
other lids after installing the appliance in the kitchen unit
again.
14 Installing the appliance in the
recess
The appliance is installed using the following main steps:
1. Have your tools ready. Fig. 20 ()
2. Check the assembly parts in the accessory kit.
3. Prepare the recess and the appliance.
4. Align the appliance in the recess.
5. Put in the covers and height adjuster.
6. Mount the front of the cabinet.
7. Check the installation.
Tools
55