Environmental Conditions; Conditions Of Use - CLAS HU 1106 Manuel D'utilisation

HU 1106
PNEUMATIC BRAKE AND CLUTCH BLEEDER
INTRODUCTION
This manual will guide you to a correct use of the machine and to quickly identify all its parts.
Read carefully the instructions at the foot.
Non compliance with the informations given and an improper use of the equipment may cause risks to people and
things around.

• ENVIRONMENTAL CONDITIONS:

Temperature of use -10 +60°C
Keep away from sources of heat.
• FEED CONDITIONS:
The equipment must be feeded with clean air.
Check that on the air line are installed effective ltering systems. The feeding pressure must never exceed the value
of 6 bar.

• CONDITIONS OF USE:

Use only original spare parts.
Always replace the accessories damaged.
Do not introduce corroding liquids nor explosives.
The product exit pressure must comply with the values given on the dataplate.
Follow the indications suggested by the supplier of the liquid used.
CONTENTS
1 - Filler cap
2 - Cock
2A - Air connection
3 - Reduction gear knob
4 - Ball tap
5 - Automatic tting
5A - Breather valve
6 - Knob
8 - Pressure gauge for membrana pressure
9 - Spiralled pipe
10) - Input pressure gauge
11 - Membrane
+ 5 metal plugs