Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
15
REMOVE LINER 8
While holding the part in position, pull tape tab 8 to remove tape liner.
Apply light pressure behind tape tab as it is removed to adhere the tape
to the vehicle surface.
8
8
8
8
16
PRESS
Part Number
E751SVC000
INSTALLED PART
Issue
Date
01
05/26/2021
INSTALLATION MANUAL
WRX/WRX STI - VORTEX GENERATOR
After all tape liners are removed, apply
30 PSI downward for 10 seconds to all
taped areas for proper bond.
Tape reaches maximum bond after 24
hours of contact. Visually inspect entire
perimeter of part to ensure complete
adhesion between tape and roof surface.
SUBARU OF AMERICA
10 Sec
30 PSI
Page
7 / 7
Publicité
Table des Matières
