ATH-Heinl Single Lift 12P Manuel D'utilisation page 74

3.0 OPERATION
3.1 Operating Instructions
Company:
Place of work:
Operation:
Risks to People and the Environment
 Falling of loads or parts
Crushing and shearing points when moving the lifting platform

 Danger due to uncontrolled moving parts
Protective Measures and Rules of Conduct
Before starting work:
Lifting platforms may only be used independently by trained persons over the age

of 18 who have been instructed in writing.
 When working with more than one person, a supervisor must be appointed
Daily functional check

 Observe the manufacturer's operating instructions
During operation:
 Pay attention to crush and shear points in the environment
Do not load the lifting platform above the permitted maximum load

 Do not lift people
Do not shake the lifting platform, avoid rocking.

When lowering, do not stand in the lifting platform movement area

Arrange regular checks of the lifting platform

Response to faults and hazards
 In case of fault, stop the lifting platform immediately
Secure against further use

 Report defects to the installer or manufacturer
First Aid
Inform first aiders (see alarm/emergency plan)

Treat injuries immediately

 Enter into the accident book
 Contact emergency services for serious injuries
Maintenance
 Repair only by instructed and trained persons
Disconnect or secure the lifting platform from the mains power supply for set-up,

adjustment, maintenance or servicing
 Clean the lifting platform after operation and check the hydraulic level
Annual check of the lifting platform by an authorised and trained person

® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-11
Operating Instructions
Lifting Platform
Emergency number:
Ambulance service: _______________
Manufacturer ATH-Heinl GmbH & CO.KG
for
_____________
- 24 -
Date:
Signature: