Power Fist 8416471 Mode D'emploi page 10

V 2.0
d. Push the two corners on front lens retaining frame until it
snaps into place (Fig. 9).
e. Insert tabs of the back lens-retaining frame under the two slots
of the helmet (Fig. 10).
f. Push the corners until it snaps into right place (Fig 11).
CLEANING
Do not use solvents or abrasives to clean the helmet or lens or immerse in water. Clean the welding filter with lint
free tissue or cloth.
DISPOSING OF TOOL
If your tool has become damaged beyond repair, do not throw it out. Bring it to the appropriate recycling facility.
10
Auto-Darkening Welding Helmet
For technical questions call: 1-800-665-8685
8416471