Pfannenberg PWT 6402 230V Manuel D'utilisation page 55

GB
5.2 Cleaning the air/water heat exchangers - removing unit cover
Requirements
-
Air/water heat exchanger is without voltage
Procedure
▪
Remove fixing screws (1).
▪
Lift the unit cover (2) upwards.
 Remove the earth cable from the cover (inside) (3).
▪
Pull off the unit cover (2).

Unit cover is removed.
Operating Manual PWT 6402 230V / 400V 086100107b © Pfannenberg GmbH
Figure 16 – Removing unit cover
Page 25 / 30