Pfannenberg PWT 6402 230V Manuel D'utilisation page 49

GB
3.5 Electrical connection
3.5.1 Electrical circuit diagram
DANGER
Danger of fatal injury due to electric shock
Voltage-carrying units and exposed connection cables may cause electric shocks and serious accidents.
➢ Only trained electricians may work on electrical connections.
➢ Make sure that there is no voltage on the unit before laying the electrical connections.
Alarm
Item Designation
B1 Thermostat
SK Fault signal contact
X90-
Connecting clamp
X97
F1 Internal fuse
 Only units with a rated operating voltage of 400V / 460V can be optionally connected to another mains voltage.
Reconnection is made via the supply line on the primary side of the transformer.
Operating Manual PWT 6402 230V / 400V 086100107b © Pfannenberg GmbH
230V
Alarm
400V
Item Designation
M1 Fan
X40 Ground terminal contact
Y1 Solenoid valve
Item Designation
S1 Float switch
X50 Plug contact
T1 Transformer
Page 19 / 30