KBL megaSun Optima Mode D'emploi page 34

> 1.. .20
These settings must only be made by
trained service personnel!
Factory setting: Depending on the operator country
Displays the current values during a melanin
measurement.
This function is intended for sensor diagnosis to be
performed by qualifi ed service staff!
> 0 .. . 9
Sets the volume of the easyCare voice-guidance
system.
Factory setting: 4
These settings must only be made by trained
service personnel!
34
U t i l i s a t i o n e t M a i n t e n a n c e |
All manuals and user guides at all-guides.com
EASYCARE\SETTINGS
Melanin min runtime
>
EASYCARE 02/03
Sensor-Check
> 00000
EASYCARE 03/03
Volume
>
UV-LEVEL
SET UV-LEVEL
>
07/07
Loads the factory (default) settings.
Submenu call
with START/ENTER.
PERSONAL PIN activate / deactivate
Enter your personal PIN.
01/01
Submenu call with START/ENTER. Displays the
current fi rmware typ / variant.
SERVICE 01/10
Load factory defaults
> Reset: press `-` for 2s
SERVICE 02/10
PERSONAL PIN
> press ENTER
SUBMENU
SERVICE\PERSONAL PIN 01/01
ENTER SOLARIUM PERSONAL PIN
> PIN:
SERVICE 03/10
FIRMWARE-TYP
> press enter