Description
Warning:
The opening of the Wind / Sun cover leads to its destruction and loss of the warranty.
Adjustment of
brightness threshold
1.......4.......14
(Factory setting) = 4
Operation
The Wind / Sun safety control includes:
- A wireless and battery-free sensor to measure wind speed and brightness. It transmits radio waves towards
the control module.
- A control module which receives the radio waves transmitted by the sensor and controls products linked to it
during learning. It then becomes the scenario Leader.
The control module can manage three different scenarios linked to the three control buttons:
-
The scenario linked to this button starts as soon as the wind level pre-set on the sensor is reached.
Wind
-
The scenario linked to this button starts as soon as the sun level pre-set on the sensor is reached.
Sun
Hidden
-
The scenario linked to this button starts as soon as the sun level is below the level pre-set on the sensor.
sun
It is possible to control manually those three scenarios from control buttons.
The "Comfort" control button allows activation or deactivation of the two scenarios linked to the buttons
"Sun" and "Hidden sun".
Warning:
For safety reasons:
- The "wind safety" is never deactivated,
- When the "wind safety" scenario starts, all local orders are
instantaneously stopped during a quarter of an hour.
(1) Learning: action of linking products to be controlled simultaneously from a central point.
This linking is performed by applying the scenario learning procedure on page 7.
(2) Scenario: corresponds to all the products (actors) which are linked to a control button.
Adjustment of wind
safety threshold
1 –>
7.2 km/h
2 –>
14.4 km/h
3 –>
21.6 km/h
4 –>
28.8 km/h
5 –>
36 km/h
6 –>
43.2 km/h
7 –>
50.4 km/h
8 –>
57.6 km/h
9 –>
64.8 km/h
10 –>
72 km/h
11 –>
79.2 km/h
(Factory setting) = 4
LEARN indicator light
Identification No.
Communication media
PLC => Power line carrier
RF => Radio frequency
"Comfort mode"
indicator light
"Comfort mode"
activation
6
LEARN button
Control buttons