installation, external intervention, damage due to physical or electrical shocks, dropping or atmospheric phenomena.
• Do not open the device, as this will void the warranty.
• If returning the product for after-sales service, protect the screen to prevent scratches.
• Clean with a soft cloth only, no solvents. The warranty is void if parts have been dismantled. Before cleaning, discon-
nect the equipment or switch it off at the mains.
Warning: Do not use any carboxylic acid, alcohol, or similar chemicals on the product. In addition to damaging
your device, the fumes are also hazardous to your health and are explosive.
Do not use any tool that can conduct voltage (wire brush, sharp tool, etc.) for cleaning.
The receipt or invoice is proof of purchase date.
10. SAFETY MEASURES
Damage caused by failing to adhere to the manual nullifies the warranty. We will not accept liability for damage
resulting from non-compliance!
We will not accept liability for any harm to goods or people caused by improper handling or failure to adhere to safety
instructions.
This product was manufactured in total compliance with safety guidelines. In order to maintain this status and provide
for the best possible conditions of usage, the user must adhere to the safety instructions and warnings in this manual.
: This symbol indicates a risk of electrical shock or short-circuiting.
- Only use this product with electrical current in the following ranges: 100-240 volts and 50-60 hertz. Never attempt to
use this device at a different voltage.
- Ensure that all the system's electrical connections conform to the instructions for use.
- In commercial establishments, ensure that you adhere to the electrical installation accident prevention regulations.
- In schools, training facilities, workshops, etc. qualified personnel must be on hand to monitor electronic equipment
operation.
- You must follow the instructions for use of any other devices connected to the system.
- Please contact an experienced person if you have any doubts regarding equipment operation or safety.
- Never plug in or unplug electrical equipment with wet hands.
- When installing this product, check that the power supply cables are not at risk of being damaged.
- Never replace damaged electrical cables yourself! In this case, remove them and call an expert.
- The electrical socket must be close to the device and must be easily accessible.
WARNING
Let the user know about 'dangerous voltage' without insulation inside the casing of the product.
The voltage is strong enough to pose a risk of electrocution.
Let the user know about important instructions for usage and maintenance (including
repair) in the documents accompanying the device.
EXTEL COMPACT - ADDCOMPACT
GB6