Xiaomi G11 Manuel D'utilisation page 13

2. Wipe away excess dust and debris from the tangle-free brush bar, suction
opening, and transparent plastic cover using a dry cloth or paper towel.
Note:
The tangle-free brush bar contains an electric motor. Do not clean it with water.
3. Reinsert the roller brush in the direction shown and firmly press the end cap
until it clicks into place.
Cleaning the Electric Mite Brush
1. Use a coin to turn the lock counterclockwise until you hear a click.
2. Remove the roller brush from the electric mite brush, then rinse and clean it.
3. Allow the roller brush to dry thoroughly by standing it upright in a well-
ventilated area for at least 24 hours. Once the roller brush is dry, reinstall it by
following the disassembly steps in reverse.
24h
12
Roller Brush