Environmental Instructions - NAVEE N40 Manuel Utilisateur

1. Safety Instructions
Eliminate any sharp edges caused by use.
·
Accessories and any additional items which are not approved by the manufacturer shall not be used.
·
Regularly check the tightening of the various bolted elements, in particular the wheel axles, the folding system, the
·
steering system and the brake shaft.
Do not modify or transform the vehicle, including the steering tube and sleeve, stem, folding mechanism and rear
·
brake.
Make sure the scooter is turned off when being transported and kept in its original packaging if possible.
·
In order to avoid accidental injuries such as electric shock and fire caused by improper use, please read the
·
instructions carefully before use, and keep them properly for future reference.
Please use this product in accordance with the instructions in the User Manual. Users are responsible for any loss or
·
damage arising from improper use of this product.
Do not charge if the charge port or charge cable is wet. Read this manual carefully before charging.
·
Do not charge the scooter at an ambient temperature above 45° C or below 0° C.
·
WARNING:
For the purposes of recharging the battery, only use the detachable supply unit provided with
·
this appliance. Do not use a battery charger from any other product. Keep a safe distance from the surrounding
combustibles when charging.
WARNING:
Do not use any third-party battery or battery charger. Use only with FY0684201500 supply unit.
·
WARNING!
Keep plastic covering away from children to avoid suffocation.
·
WARNING!
Never use the product close to a water source.
·
WARNING!
Stop using the product when damaged.
·

Environmental Instructions

The scooter contains a rechargeable lithium-ion battery pack, and improper disposal of these batteries will cause harm
to the environment. Follow the steps below to remove the batteries before disposing of the scooter and discard the
batteries properly:
1. Before removing the batteries, it is better to use them up and make sure the scooter is disconnected from the power
supply. Then unscrew the bottom cover of the scooter to remove it.
2. Unplug the battery connector, and then remove the batteries. Do not damage the battery case to avoid any risk of
injuries.
3. Discard the removed batteries at a professional recycling facility.
EN
3