Certification - NAVEE N40 Manuel Utilisateur

14. Troubleshooting
Error Error Message
Rx Communication
E1
Failure
E2 Braking Error
E3 Accelerator Error
E4 Wheel Motor Error
E5 Controller Error
E6 Overheating Warning

15. Certification

FCC Supplier's Declaration of Conformity
This supplier's declaration of conformity is hereby for
Product: NAVEE Electric Scooter N40
Model Number(s): NKP21111-A30
Brand/Trade: NAVEE
We declare that the above mentioned device has been tested and found in compliance with CFR 47 Part Regulation.
Responsible Party—U.S.Contact Information
Company: Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd.
Address: Building A2, Shangjinwan Headquarters Economic Park, No.2288, Wuzhong Avenue, Wuzhong Economic
Development Zone, Suzhou Jiangsu P.R. China
Country: China
Check whether the tail light is on, if not, replace the controller or
instrument. If it is on, please check whether the wire connection between
controller and instrument.
Check the wire connection or replace the brake level.
Check the wire connection or replace the accelerator.
Check whether the wheel motor and the controller cord are well
connected or replace the motor.
Check the controller wire connection or replace the controller.
Wait until the battery temperature normalizes before resuming use.
Solution
EN
19