Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN
11. Maintenance

Lubrication

During maintenance, add a small amount of grease or lubricant to the folding part every 6 months. Check the tightness
of the screws on the scooter every 3 months and tighten any loose screws.
Battery
Please fully charge the battery before the first use of the scooter.
Charging will not damage the battery. If this product is not used for a long time, please make sure it is charged at least
every 3 months.
Storage and Daily Maintenance
The scooter should always be turned off before being cleaning.
Please never leave the scooter in the hot sun or wet place for extended periods of time.
Please keep the scooter clean.
Do not clean thes scooter with a high pressure hose or nozzle.
Please never scrub with corrosive soaps or solvents.
Inflate the Tire
Check the tire pressure every month, and inflate the tires if the pressure is too low. The recommended tire pressure is 35 psi.
Do not make any modifications to the N40 scooter
Please never refit or modify the scooter in any way, including the steering column and sleeve, rod, folding parts, and
rear brake assembly.
Warning!
· It is recommended to check the folding device, shock absorber, wheel and axle of the scooter regularly. If there is
wear, please replace them promptly.
· It is recommended that the frame and front fork are regularly checked. Long term use may lead to loosened screws.
Clean and tighten the screws regularly if needed.
· Please replace any parts in case of failure, damage, or malfunction.
· When the parts exceed the expected service life, please replace them in due time.
16

Publicité

Table des Matières
loading

Table des Matières