Air Filter; Fuel Filter - Echo PB-200 Manuel De L'opérateur

AIR FILTER

Level 1.
Tools required: 25-50 mm (1-2 in.) Cleaning brush.
Parts required: 90008 REPOWER
NOTE
Clean daily.
1. Close choke (Cold Start Position [
entering the carburetor throat when the air filter is removed. Brush
accumulated dirt from air cleaner area.
2. Remove air filter cover. Brush dirt from inside cover.
3. Remove air filter and lightly brush debris from filter. Replace filter
if it is damaged, fuel soaked, very dirty, or the rubber sealing
edges are deformed.
4. If filter can be reused, be certain it:
• Fits tightly in the air filter cavity.
• Is installed with the original side out.
5. Install air filter cover.

FUEL FILTER

Level 1.
Tools required: 200-250 mm (8-10 in.) length of wire with one end bent
into a hook, Clean rag, funnel, and an approved fuel
container.
Parts required: 90008 REPOWER
WARNING
Fuel is VERY flammable. Use extreme care when mixing, storing or
handling.
1. Use a clean rag to remove loose dirt from around fuel cap and
empty fuel tank.
2. Use the "fuel line hook" to pull the fuel line and filter from the
tank.
3. Remove the filter from the line and install the new filter.
All manuals and user guides at all-guides.com
TM
Air and Filter Kit
]). This prevents dirt from
TM
Air and Filter Kit
DANGER
P B
OWER LOWER
O ' M
PERATOR S ANUAL
15