Project Source ANIYA Mode D'emploi page 6

ASSEMBLY INSTRUCTIONS
4. Place the drop-in basin into place. Check to make sure
that the drop-in basin is centered on the vanity top and
there is enough space for it to fit into place.
5. Mount the faucet and drain assembly (not included) on the
sink following faucet manufacturer's instructions.
6. After confirming that the drop-in basin fits into place, turn
drop-in basin upside down and apply a generous portion of
sealant on the underside of the rim close to the edge.
After the sealant has been applied, carefully place drop-
in basin into place and press down firmly and trim any
excess sealant or putty off.
4
5
6
6