Numark MixMeister Control Guide D'utilisation Rapide page 6

13. MASTER TRANSPORT – These are the
transport controls for the Master mix. This is the
mix that your audience hears so be careful!
a. MIX NOW – Immediately mixes the
currently playing track into the next track
from the playlist.
b. STOP – Stops playback and cues the
cursor at the beginning of the next track.
c. PLAY / PAUSE – Plays and pauses the
Master mix.
14. STRIP SOLO CONTROLS – These four buttons
allow you to solo a channel in the mix. Note that
more than one channel can be soloed at a time.
Also note that the last soloed channel will be
selected for editing (see EDIT CONTROLS).
15. BROWSE KNOB – Turn this knob to browse the
contents of the Library panel.
contains all your songs and audio files. To load
a selected track into the playlist, press down on
the knob.
16. PREVIEW KNOB – Press down on this knob to preview the track currently selected in the Library
panel. Turn the knob to shuttle to a different location in the track preview. Press again to stop the
preview.
17. TRACK KNOB – Shuttles between track mix points on the timeline display. You can also use this knob
to reorder the tracks in the playlist; simply hold down the knob to "pick up" the track, rotate to select a
new position in the playlist, and release the knob to "drop" the track in the desired position.
18. TRANSITION KNOB – Transition effects specify how one track will be mixed into the next. A variety of
transition effects, including Beatmix, Cut and Crossfade are available. Turn this knob to select a
desired transition effect for the selected mix point. Press down to apply the transition.
19. TWEAK KNOB – Selects between several available track tweaks. Rotate to select the tweak and
press down to activate it.
20. OUTRO KNOB – Controls the position of the
selected track's Outro anchor. The Outro anchor
defines the start point for the track mix-out. You
can use the Outro knob to slip the track mix-out
point forward or backward in time. Push down
on the knob to decrease the grid density/snap to
beat setting.
21. INTRO KNOB – Controls the position of the
incoming track's Intro anchor. The Intro anchor
defines the start point for the track mix-in. You
can use the Intro knob to slip the track mix-in
point forward or backward in time. Push down
on the knob to increase the grid density/snap to
beat setting.
22. JOG WHEEL – Controls the preview cursor position in the timeline display. Rotate to shuttle forward or
backward in the timeline.
23. SELECT – When a channel has been selected for editing (see STRIP SOLO CONTROLS), this button
is used in conjunction with the JOG WHEEL to select a segment for editing. Press and hold SELECT,
use the JOG WHEEL to highlight the desired area, then release SELECT; all edit functions (copy,
paste, cut) can now be used.
24. MASTER VOLUME – Adjusts the audio level of the Master mix. Be careful when adjusting this volume;
you do not want the audio meters going into the red, as this will result in a distorted or "clipped" signal.
25. PREVIEW / PERFORM – Controls which audio signal is sent to the Headphone output. Press to toggle
between Preview audio (the audio at the Preview cursor), or Perform audio (the Master mix output
which the audience will hear).
26. HEADPHONE VOLUME – Adjusts the level of the Headphone output. Keep in mind that this control is
only available when using a dual or multi-channel audio configuration. In this scenario, the Headphone
output can be used to audition the Preview mix.
MixMeister Fusion Live features two distinct
audio paths: the Master Mix and the Preview
Mix. The Master Mix is what your audience
hears. The Preview Mix allows you to work
independently of what the audience hears and
refine upcoming track transitions before they
are heard.
By default, MixMeister is in single output mode
and will only output the Preview Mix (Master
transport controls are unavailable). To take full
advantage of the Preview Mix channel, you
will either need to use a dual or multi-channel
soundcard configuration. This allows you to
output the Master and Preview channels on
separate
preferences are set in the TOOLS | AUDIO
OUTPUT CONFIGURATION menu.
The Library
You can add files and folders to the Library by
selecting FILE | ADD FILES TO LIBRARY.
MixMeister Fusion Live uses anchors to
define how song link together and overlap.
Each anchor is marked by a vertical orange
line in the track display.
Each track transition is characterized by two
anchors: 1 Outro anchor which specifies
when the current track will be mixed out,
and 1 Intro anchor which specifies when the
incoming track will be mixed in.
6
audio outputs. Audio output