Publicité
Step 22
NOTE: Position the PLATFORM SUPPORTS exactly as shown.
å
Fasten one of the PLATFORM SUPPORTS (S) to the UPRIGHT (Q).
å
Use two BLACK 1-1/8" PAN HEAD SCREWS (9S).
Fasten the remaining two PLATFORM SUPPORTS (S) to the
å
PLATFORM SUPPORTS (S) that are fastened to the SHORT
CLEATS (L). Use eight BLACK 1-1/8" PAN HEAD SCREWS (9S).
Fasten the HEADBOARD (A) to three PLATFORM SUPPORTS (S).
å
Use six BLACK 1-15/16" FLAT HEAD SCREWS (113S).
BLACK 1-1/8" PAN HEAD SCREW
(10 used in this step)
BLACK 1-15/16" FLAT HEAD SCREW
(6 used for the HEADBOARD)
www.sauder.com/service
9S
S
S
A
113S
S
Q
S
423450
L
L
S
Page 25
Publicité
