Sauder Queen 423450 Mode D'emploi page 12

Step 9
NOTE: The WOOD DOWELS (15F) will be inserted into the
å
edge with two CAM SCREWS in each CENTER LEG (E).
First, fi ll the holes in the CENTER LEGS (E) 1/4 to 1/2 full with
å
GLUE (54M). Then, insert the WOOD DOWELS (15F) into the
holes. Wipe away the excess GLUE.
Now, fi ll the holes in the CENTER SUPPORT (K) 1/4 to 1/2 full
å
with GLUE.
Fasten the CENTER LEGS (E) to the CENTER SUPPORT (K).
å
Tighten four HIDDEN CAMS. Wipe away the excess GLUE.
NOTE: Be sure the WOOD DOWELS in the CENTER LEGS
å
insert into the CENTER SUPPORT.
1
2
This hole is closer
to this edge.
15F
E
Page 12
54M
K
These surfaces
should be even.
423450
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
E
15F
These surfaces
should be even.
www.sauder.com/service