Sauder Queen 423450 Mode D'emploi page 13

Step 10
NOTE: The WOOD DOWELS (15F) will be inserted into the edge
å
with two CAM SCREWS in each HEADBOARD LEG (C and D).
First, fi ll the holes in the HEADBOARD LEGS (C and D) 1/4 to 1/2
å
full with GLUE (54M). Then, insert the WOOD DOWELS (15F) into
the holes. Wipe away the excess GLUE.
Now, fi ll the holes in the HEADBOARD (A) 1/4 to 1/2 full with GLUE.
å
Fasten the HEADBOARD LEGS (C and D) to the HEADBOARD (A).
å
Tighten four HIDDEN CAMS. Wipe away the excess GLUE.
NOTE: Be sure the WOOD DOWELS in the HEADBOARD LEGS
å
insert into the HEADBOARD.
15F
C
www.sauder.com/service
These holes are
closer to this edge.
54M
These surfaces
should be even.
A
423450
Fill the holes 1/4 to 1/2 full with GLUE.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
D
15F
These surfaces
should be even.
Page 13