Proctor Silex 35041 Mode D'emploi page 6

How to Assemble the Fryer
Place base on a stable, flat surface.
1.
Insert oil pot into base.
2.
Align grooves of heating element assembly
3.
with grooves on base. Push down on
heating element assembly to connect it to
base.
NOTE: Heater cannot be turned on unless
correctly installed on base.
To assemble handle, squeeze tines of
4.
handle together.
Align tines with round holes on metal
5.
bracket of basket.
Release tines to allow them to spread and
6.
then pull handle back to lock into metal
bracket.
For storage: Push handle into basket and
squeeze tines together to remove handle.
Align removable vent cover with metal
7.
grease screen and snap into place.
840254400 ENv11.indd 6
6
4/2/15 10:20 AM