Filling & Refilling - Levoit VeSync Classic 300S Mode D'emploi

EN
Filling & Refilling
Note: Make sure the water tank is clean
before filling.
1.
Remove the water tank cover by holding
the nozzle and pulling upward.
[
Figure 1.5
2.
Use the handles to remove the tank
from the base. Fill the tank with room-
temperature water. [
Do not
fill with hot water.
Do not
fill past the tank's max water line.
10
]
Figure 1.5
]
Figure 1.6
Figure 1.6
Note:
We recommend using purified or distilled
•
water to fill the tank.
Do not fill past the tank's max water line.
•
CAUTION
•
Do not add water directly into the base
chamber. [
Figure 1.7
Figure 1.7
•
Do not add water through the mist tube.
•
Do not add essential oils into the
humidifier. [
Figure 1.8
essential oils to the aroma pad.
[ ]
Figure 1.9
Figure 1.8
•
Do not use water treatment liquids or
third-party water filters in this humidifier.
]
]
Only
add
Figure 1.9