Télécharger Imprimer la page

Beko CN151720 Mode D'emploi page 9

Masquer les pouces Voir aussi pour CN151720:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 58
3
Installation
B
In case the information which are given
in the user manual are not taken into
account, manufacturer will not assume
any liability for this.
Points to be paid attention
to when the relocation of the
cooler/freezer
1.
Your cooler/freezer should be unplugged.
Before transportation of your cooler/
freezer, it should be emptied and cleaned.
2.
Before it is re-packaged, shelves,
accessories, crisper, etc. inside your
cooler/freezer should be fixed with
adhesive tape and secured against
impacts. Package should be bound
with a thick tape or sound ropes and
the transportation rules on the package
should be strictly observed.
3.
Original packaging and foam materials
should be kept for future transportations
or moving.
Before you start the cooler/
freezer,
Check the following before you start to
use your cooler/freezer:
1.
Attach 2 plastic wedges as illustrated
below. Plastic wedges are intended to
keep the distance which will ensure the
air circulation between your cooler/freezer
and the wall. (The picture is drawn up as
a representation and it is not identical with
your product.)
All manuals and user guides at all-guides.com
2.
3.
4.
5.
Electrical connection
socket which is being protected by a fuse
with the appropriate capacity.
Important:
with national regulations.
8
EN
Clean the interior of the cooler/freezer as
recommended in the "Maintenance and
cleaning" section.
Connect the plug of the cooler/freezer to
the wall socket. When the fridge door is
opened, fridge internal lamp will turn on.
When the compressor starts to operate, a
sound will be heard. The liquid and gases
sealed within the refrigeration system
may also give rise to noise, even if the
compressor is not running and this is quite
normal.
Front edges of the cooler/freezer may
feel warm. This is normal. These areas
are designed to be warm to avoid
condensation.
Connect your product to a grounded
The connection must be in compliance
The power plug must be easily accessible
after installation.
Electrical safety of your cooler/freezer shall
be guaranteed only if the earth system in
your house complies with standards.

Publicité

loading

Ce manuel est également adapté pour:

Cn151720dx