Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
How to attach/detach the control
panel
How to reset your unit
Your preset adjustments will
also be erased.
How to forcibly eject a disc
[Hold]
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.
Maintenance
Cleaning the unit
Wipe off the dirt on the panel with a dry silicon
or soft cloth. Failure to observe this precaution
may result in damage to the unit.
Cleaning the connector
Wipe off dirt on the connector of the unit and
panel. Use a cotton swab or cloth.
Caution:
If the temperature inside the car is below 0°C,
the movement of animation and text scroll will
be halted on the display to prevent the display
from being blurred.
When the temperature increases, and the
operating temperature is resumed, these
functions will start working again.
appears on the display.
CONTENTS
4
4
5
5
6
7
9
Condensation : When the car is air-
conditioned, moisture may collect on the
laser lens. This may cause disc read errors. In
this case, remove the disc and wait for the
moisture to evaporate.
Temperature inside the car : If you have
parked the car for a long time in hot or cold
weather, wait until the temperature in the car
becomes normal before operating the unit.
ENGLISH
3
Publicité
Chapitres
Table des Matières
Dépannage
