Menu Operations - JVC KD-R821BT Manuel D'instructions

Storing your own sound mode
You can store your own adjustments in
memory.
1
2
] <PRO EQ> ] <Bass/ Middle/ Treble>
3
Adjust the sound elements of the
selected tone. (See table on the right
column.)
1 Press 4
frequency.
2 Turn the control dial to adjust the
level.
3 Press 5 / ∞ to adjust the Q-slope.
4 Press the control dial to store the
adjustment.

Menu operations

1
If no operation is done
for about 60 seconds, the
operation will be canceled.
Menu item
DEMO
Set Clock
24H / 12H
Clock Adjust *
*
1 Takes effect only when CT (clock time) data is received.
22 ENGLISH
[Hold]
/¢ to adjust the
2
[Hold]
On : Display demonstration will be activated automatically if no operation is done for
about 20 seconds. / Off : Cancels. (page 4)
For settings, see page 4.
For settings, see page 4.
1 Auto : The built-in clock is automatically adjusted using the CT (clock time) data in the
Radio Data System signal. / Off : Cancels.
4 Repeat steps 2 and 3 to adjust other
tones.
5
] Exit from the menu.
The adjustments made will be stored
and changed to "USER."
Bass [ Initial: 50 Hz, 0, Q1.0 ]
Frequency: 50 Hz, 100 Hz, 200 Hz
Level:
Q:
Middle [ Initial: 1 kHz, 0, Q1.0 ]
Frequency: 500 Hz, 1 kHz, 2 kHz
Level:
Q:
Treble [ Initial: 10 kHz, 0, Q1.0 ]
Frequency: 5 kHz, 10 kHz, 15 kHz
Level:
Q:
3
Selectable setting, [ Initial: Underlined ]
–6 to +6
Q0.7, Q1.0, Q1.4, Q2.0
–6 to +6
Q0.7, Q1.0, Q1.4, Q2.0
–6 to +6
Q0.7, Q1.0, Q1.4, Q2.0
Repeat step 2 if necessary.
• To return to the previous
menu, press T/P BACK.
• To exit from the menu, press
MENU.