Listening To The Other External Components; Selecting A Preset Sound Mode - JVC KD-R821BT Manuel D'instructions

Listening to the other external components

You can connect an external component to the AUX (auxiliary) input jack on the control panel.
Preparation:
Make sure <Show> is selected for the <Source Select> = <Aux Source> setting. (page 25)
• For details, refer also to the instructions supplied with the external components.
~
] "AUX IN"
Turn on the connected component
Ÿ
and start playing the source.
Connecting an external component to the AUX input jack

Selecting a preset sound mode

You can select a preset sound mode suitable
for the music genre.
FLAT = NATURAL = DYNAMIC = VOCAL
= BASS = USER = (back to the beginning)
While listening, you can adjust the subwoofer
level and tone level of the selected sound
mode.
1
[Hold]
!
] Adjust the volume.
Adjust the sound as you want.
⁄
(page 21, 22)
3.5 mm stereo mini plug
(not supplied)
Recommended to use a 3-terminal plug head
stereo mini plug for optimum audio output.
2
] Select a setting item (Sub. W/ Bass/
Middle/ Treble).
3
] Adjust the level:
Sub. W : 00 to 08
Bass/ Middle/ Treble : –6 to +6
The sound mode is automatically stored
and changed to "USER."
Portable audio player,
etc.
Continued...
ENGLISH 21