Polk Audio SR1 Mode D'emploi page 6

4. Syncing the Surround Speakers to the Soundbar
Note: You must sync BOTH surround speakers AND the subwoofer.
Sync the Subwoofer
1) Press the power button on the soundbar to turn it on.
2) On the back of the SOUNDBAR, press and hold the SYNC button until you hear a
tone (about 3-4 seconds) and then release the button. The SUB and SURR lights
above the SYNC button will flash green
3) On the back of the SUBWOOFER, press and hold the SYNC button until you hear
a tone (about 10 seconds) and the light on the back of the subwoofer turns solid
green.
Sync the Surround Speakers
4) On the back of EACH of the SURROUND SPEAKERS, press and hold the SYNC
button until the light on the bottom of the speaker turns solid green (about 10 sec-
onds).
5) When BOTH LEFT and RIGHT surround speakers are paired to the bar you will hear
a tone from the bar.
NOTE: If you hear a two note descending tone from the bar syncing failed. Please try
again.
Autogoods "130"
5