Polk Audio SR1 Mode D'emploi page 5

Setup
Connecting to Your Surround Speakers
Placing or mounting the surrounds
1.
Place the surround speakers on the left and right
sides and equidistant from the main listening
position. Make sure you place the speaker marked
"L" on the left and the speaker marked "R" on
the right. If you decide to mount the surrounds,
Please refer to the wall mounting template for
instructions.
Connecting the surrounds to an AC outlet
2.
A fl ashing green light will be visible on the back of the
surrounds until you have manually synced the bar, sub,
and surrounds.
Verifying your connections
3.
Turn on your TV and verify that you are seeing video and
hearing sound from the sound bar.
If you do not hear sound and do not see any lights on the
front of your sound bar, press the power button on the
sound bar to turn it on.
Note: If you are hearing sound from both your TV and your sound bar, you
must manually turn off your TV speakers using the Settings Menu on your TV.
4
Please refer to your TV's owner's manual for instructions.
SYNC POWER
Autogoods "130"
TV
Surrounds
L R
15V 1.2A