Brake Pad Configuration - BMC TMR01 Instructions De Montage

Brake pad configuration (front and rear)
• Depending on rim dimensions, the reach of the brake pads needs to be adjusted with spacers (7, 8, 9, 10).
You can use the table below as a guide.
Rim type
Zipp 303/404/808
Easton EC90 SL
Mavic Cosmic Carbone SL
• Note to only put the one washer (N°11) between brake arm and brake shoe bolt (N°12).
• Please refer to the wheel manufacturer instructions for brake pad specification.
13. Adjust the spring tension (M4 adjustment bolts) to achieve symmetrical pull of the brake arms.
Rim width Spacers per side (mm)
26.5 0.5
23 2.5
22 3
21 3.5
20.5 3.7
19 4.2
POS Description
1 Brake pad
2 Socket 10mm
3 Socket 12mm
4 Brake shoe
5 Locker bolt
6 Parabolic washer
7 Spacer 0.5mm
8 Spacer 1.2mm
9 Spacer 1.5mm
10 Spacer 2.0mm
11 Washer
12 Bolt M5 x 16
Socket length
10
10
10
12
12
12
Part N°
Brake
shoe set:
212498