Seat Clamp And Seat Post Installation - BMC TMR01 Instructions De Montage

Seat clamp & seat post Installation
1. Apply grease on the seat post clamp wedges as well as on the seat post clamp outer surface.
Do not put grease on the seat post contact surface.
2. Assemble the seat post clamp (1) and insert it into the frame (2).
3. For Di2 shifting install the Di2 integrated Battery into the seat post.
4. Apply carbone friction paste on the lower part of the seat post as well as on the inside of the seat tube.
5. Insert the seat post into the seat tube.
6. Install the saddle clamping hardware (N°1).
7. Tighten the seat post clamp bolt to 5Nm max (3).
8. Install the rubber plug (N°3) to close the gap on the top tube.
2
1
2
grease
3
3
Description
1 Saddle clamp kit
2 Seat post clamp kit
3 Rubber plug
4 Seat post "team red"
Seat post "flame"
Seat post "shark"
Seat post "white"
5Nm
Part N°
212482
212483
212484
212478
212479
212480
212481
9 / 10