BMC TMR01 Instructions De Montage page 13

3
7. Run the cables through the required cable guides and grommets, and then install the cable guides on the frame to close the
openings at the head tube (5). The 4 possible combinations are listed below.
5
Shorter screw
Longer screw
Combinations / Description
A Mechanical (USA and EU standard)
B Mechanical (UK standard)
C Di2 (USA and EU standard)
D Di2 (UK standard)
2 Shifting cable grommet (spare part)
3 212496
7 Di2 grommet (spare part)
4
Important: Note that the shorter
screw (4.5mm) goes to the front,
the longer screw (8mm) goes to
the back.
Required parts Part N°
1, 2, 3, 6 212487
1, 2, 3, 6 212487
5, 6, 7 212488
1, 4, 7 212488
2 212490
3 212491
7 212489
11 / 12