Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
User's Manual
MAINTAINANCE
Make sure the power is off before maintenance.
1.Because of the fan's natural movement, some connections
and screws may become loose. Check the hanger rod, fan
blade holder, and fan blade cap at least twice a year to
make sure they are secure.
TROUBLESHOOTING
If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some
cases, these installation errors may be mistaken for defects.
If you experience any problems, please check the following trouble shooting guide. If a solution to the problem cannot be found,
please consult with a licensed electrician. Do not attempt any electrical repairs by yourself. For your own safety, turn off power at
fuse box or circuit breaker before trouble shooting your fan
Trouble
Fan does not start.
Fan sounds noisy
Fan wobbles
HVLS BLDC Fan
1.Check main and branch circuit fuses or circuit breakers.
2.Check wire connections as performed in ELECTRIAL WIRING.
Caution: Make sure main power is turned off！
3.If the fan still will not start, contact a licensed electrician. Do not attempt to troubleshoot internal
electrical connections by yourself.
1.Check to make sure all screws in the motor housing are snug (not over tightened).
2.Check to make sure the screws which attach the fan blade holder to the motor are tight.
3.Allow a "break-in" period of 24 hours. Most noise associated with a new fan will disappear after
this period.
The following procedures should eliminate most of the wobble. Check for wobble after each step.
1.Check that all blades are screwed firmly into the blade holder.
2.Check that all set screws attaching the motor to the hanger rod are tight.
3.Make sure that the hanger rod is tightened securely to the I-beam mounting bracket.
4.If blade wobble is still noticeable, interchanging two adjacent (side by side) blades can
redistribute the weight and possibly result in smoother operation.
2.Clean the fan periodically to help maintain the appearance. Do not
use water when cleaning. This could damage the motor, or
possibly cause electric shock.
3.Use only a soft brush or lint-free cloth to avoid scratching the
finish.
4.There is no need to oil your fan. The motor has permanently
lubricated bearings.
Suggested Remedy
11
Publicité
Table des Matières
