Yakima KingJoe Pro 2 Notice De Montage page 6

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

BOTTOM HOOKS: Glass Hatch Adapter installation instructions
A
Remove the
caRRieR fRom
the caR.
UNBUCKLE AND PULL LOWER STRAPS COMPLETELY OUT OF THE HUB.
B
OPEN THE
TRUNK
DOOR.
D
BEFORE CLOSING THE TRUNK:
Be sure the pads are free from
contact between trunk door
and vehicle's frame.
E
Now that you've installed the bottom glass hatch adapters continue to STEP 5.
If you need Glass Hatch Adapters to replace both top and bottom hook straps, see your
dealer, or go to www.yakima.com to purchase a second set of Glass Hatch Adapters.
1033584A-6/30
No glass or plastic? You won't need the
Glass Hatch Adapters. Skip this page.
2x
C
Position the pads
Insert new strap through hub as shown. Thread new
strap back through buckle to re-attach side hooks.
inside the trunk
with the straps
hanging free.
• Close the trunk.
• Pull firmly on the straps
to seat the pads.
2x

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kingjoe pro 3

Table des Matières