G E T T I N G S T A R T E D
This appliance is intended for household use only.
• Remove all packing material, any stickers, and the plastic band around the
power plug.
• Remove and save literature.
• Please go to www.prodprotect.com/blackanddecker to register your
warranty.
• Wash all removable parts as instructed in Care and Cleaning Section.
• Select a location where this unit is to be used, allowing enough space from
the back of the unit and wall to allow heat to flow without damage to
cabinets and walls. During operation, the unit should have 6 inches or more
of clearance around sides, back, and top.
• Ensure that the crumb/steam tray is in place before use.
• When removing food from the oven, protect your hands with oven mittens
or handles.
• Unplug appliance when not in use.
• This oven has unique cleaning capabilities. Please see the Care and Cleaning
section for more details.
• The crumb/steam tray is non-stick for easy cleaning. Do not cover the
crumb/steam tray or any part of this oven with metal foil. This oven has been
designed to operate without foil. Using metal foil will negatively impact the
cooking performance of your oven.
Important information about using your oven
1.
This oven gets hot. When in use, always use oven mitts or potholders when
touching any outer or inner surface of the oven.
2.
When using the oven for the first time, you may notice smoke or a slight odor
during the first few minutes. This is normal.
3.
Many factors influence cook times such as altitude, humidity and variations in
electrical grids. For best results, monitor the end of the cook cycle.
Cooking Containers: Metal, ovenproof glass or ceramic bakeware up to
4.
standard 9" x 13" size pans (without handles) can be used in your oven.
Follow the manufacturer's instructions.
Be sure food or baking pan does not come within 1 ½ inches (3.8 cm)
5.
of the top heating elements. If you have tall food items or cooking
containers, use the wire rack in the down position.
TOD6020BC_29178_EF_IB_C.indd 7
TOD6020BC_29178_EF_IB_C.indd 7
7
4/15/22 1:42 PM
4/15/22 1:42 PM