HUUM CLIFF Serie Notice De Montage Et D'utilisation page 8

Removing the ribs of the heater
For fitting the stones, all of the ribs are removable by props (A).
1. On the bottom of the heater, release the nuts of the
threaded rod by 5 mm.
2. Push the props between the ribs of the heater.
3. Release the rib from both ends.
4. Carefully remove the rib from the joint, first from the right end
and then the left.
NB! Pull the rib away from the heater without using force or turning the
rib – avoid bending the tenons!
A
The rib under the removed rib is instantly removable in a similar fashion.
The procedure is reversed for putting the ribs back. The rib must be
attached to the joint from the left end first and then from the right.
8
1.
2.
A
3.
4.