HUUM CLIFF Serie Notice De Montage Et D'utilisation page 7

Open the cover of the heater's electrical box.
•
Attach the power cable on the terminal block according to the
•
circuit diagram.
Close the cover.
•
Fix the cable on the output with a cable strap.
•
CLIFF 3.5 kW
L1 L2
240V 2~
208V 2~
Fitting the stones
Make sure that the heating elements are not bent during the
•
process.
There must be sufficient air circulation around the heater elements.
•
We recommend washing the stones before filling the receptacle.
•
Stack the stones sparsely between the heating elements. If the
•
stones have been stacked too close to each other, the heating
elements may overheat (= shorter useful life) and slow the heating
of the sauna.
Stones with a diameter of 1.2-1.9 in (3–5 cm) are suitable for the
•
heater.
The stones on the external surface of the heater must be stacked
•
close to one another. The heating elements must not be visible.
Using ceramic stones in the CLIFF heater is allowed at the user's
•
responsibility.
Too sparsely filled stone container causes fire hazard!
ATTENTION!
We recommend a specialist to lay the stones on the heater.
NB!
CLIFF 6 kW
CLIFF 9 kW
CLIFF 10.5 kW
240V 2~
208V 2~
L1 L2
7