Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION:
1
Safely raise front of vehicle.
Remove engine under cover, if
equipped.
3
Remove negative battery terminal
first, then the positive terminal.
Remove battery from the vehicle.
5
Remove dirt and debris from the sides of
the battery. Then wipe clean and dry
7
Place the battery back in the vehicle.
Tighten battery hold down bolts taking
care not to pinch the warmer with the
hold down clamps. Reconnect the positive
terminal first followed by the negative
terminal.
.
DATE
SUBARU OF AMERICA
10/1/13
2
Loosen or remove battery hold
down bolts.
4
Remove the plastic battery cover (if
equipped) prior to installing the battery
warmer. Do not re-use the cover.
6
Wrap the warmer around the battery with
the printed side facing outwards. Pull the
warmer snug at the corners. Use the wire
wraps provided to secure the warmer to
the battery as shown. Install battery
warmer around battery with wire exiting
towards front as shown.
8
Route harness toward bottom of
vehicle and attach battery warmer
harness to vehicle harness with
wire tie provided.
PAGE
2 OF 4
703734 Rev A 10/1/13
Publicité
