Set Lock Code
The V-Chip settings are protected by a four-digit Lock Code. Your TV comes pre-set with a Lock
Code of "0000". You may change the code to any four-digit number you wish. To change the Lock
Code, follow the steps below.
Press the M
To SET LOCK CODE
¦
To operate
The lock icon
appears
Press Z
ERO
LOCK CODE
The first digit will be highlighted
¦
To select the number
To move to the next digit
Continue to follow these directions for all four numbers
To FINISH
¦
To save settings and exit
Your Lock Code is now set.
NOTES:
• After a power interruption you must reset the Lock Code.
• Write your Lock Code number down and keep it hidden from potential viewers.
• If you forget the Lock Code, a new code may be set using the steps listed above.
button
ENU
to access the Lock Code
0 0 0 0
0
FINISH
V-Chip
25