JVC AV-27GFH Manuel D'instructions page 12

Connections
The connection diagrams are intended to show some basic general connections. Some
cable companies may require special connections to properly use your television. If you
follow these diagrams and the television does not work properly, contact your local
cable operator for more connection information.
Diagram #1
AUDIO VIDEO S-VIDEO
R L MONO
REAR
IN
OVER
DIGITAL
INTERFACE
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the two-way splitter.
2) Connect an RF cable from the one of the RF Outputs on the splitter, in to the RF Input on the
back of the VCR.
3) Connect an RF cable from the other the RF Output on the splitter, in to the RF Input on the
back of the TV.
4) Connect the yellow video cable out from the VCR's Video Output, in to the TV's Video Input
jack, OR connect an S-Video cable from the VCR's S-Video output, to the TV's S-Video input.
5) Connect the white audio cable out from the VCR's Left Audio Output, in to the TV's Left Audio
Input Jack.
6) Connect the red audio cable out from the VCR's Right Audio Output, in to the TV's Right
Audio Input jack.
• If your VCR is a mono sound unit, it will have only one Audio Out jack. Connect it to the TV's
Left Audio Input.
• Please consult your VCR's owner's manual for more information on its operation.
12
Important Note About Diagrams:
AUDIO VIDEO
S-VIDEO
R L MONO
REAR
IN
OVER
DIGITAL
INTERFACE
OR
WALL
CABLE or ANTENNA
OUT
TWO-WAY
SPLITTER
VCR
IN
OR