Kimberly-Clark PROFESSIONAL ICON Mode D'emploi page 3

Install Dispenser Bracket Install Bracket
5. Bring back the mounting bracket and
insert a screw into each wall anchor to
secure the mounting bracket to the wall.
Screw the mounting bracket to the wall
starting with the marked anchor hole.
Make sure not to over-tighten the screw
and damage the bracket!
Install Dispenser
1. Carefully line the mounted
wall bracket up to the rear,
corresponding bracket pocket
of the dispenser backplate to
complete installation.
2. Once the mounting
bracket is in its designated,
corresponding pocket, lower
the dispenser backplate until
the lock button clicks.
3. Fasten the security screw
to completely secure the
dispenser to the mounting
bracket. Do not over-tighten
the security screw!
This is so that the dispenser
does not inadvertently become
separated from the bracket.
5.
1.
2a.
3.
2.
3.
2b.
!
1.
4.