Bond HYUTT15002-1 Guide D'utilisation page 9

MAINTENANCE
• Before performing any maintenance always disconnect propane gas tank.
Store your product indoors during winter months. Avoiding extreme cold temperatures will
•
prevent from exposure damage.
• Keep the heating item free and clear from combustible materials.
• Visually inspect burner for obstructions and keep tank enclosure free and clear from debris.
• Use a soft brush to get rid of the mild stains, loose dirt and soil after the burner and pumice stones/
lava rocks/LavaGlass
®
• Harsh weather conditions may cause stubborn stains, discoloration and possibly rust pitting.
• Permanent damage may occur if powder or solvent comes in contact with painted or plastic
components on this heating unit.
• Keep the heating unit stored away from direct sunlight.
• If storing this unit inside, disconnect the propane gas tank from the gas valve.
• Not using manufacturer approved or supplied parts/accessories may result in a defective condition
and void the warranty of this heating unit.
• Always place lid (if applicable) or protective cover on heating item when not in use.
TROUBLESHOOTING
Problem
Burner won't light with
a match
Heating unit emits a lot of
black smoke
Flame blows out
easily
are completely cooled down. Wipe down with a soft cloth.
Cause
No gas flow
Regulator isn't connected securely to the
tank
Spider webs or insect nest in the burner
and guard
Burner ports are clogged
Flame is obstructed at burner ports
High or gusting winds
No gas flow
Solution
Check if gas cylinder is empty
Tighten regulator connection to the gas
tank
Check the burner and guard
Turn all gas flow connections off. Insert
an opened paperclip (or similar item) into
each of the burner ports to clear them
out.
Check that all burner ports are free of
any small lava rocks/pumice stones/
LavaGlass pieces
Increase flame to 'HIGH'
Check if gas cylinder is empty
1-866-771-2663 | Page 9