Bond HYUTT15002-1 Guide D'utilisation page 6

ASSEMBLY INSTRUCTIONS
Unscrew and remove the fixing nut (E) from
1.
the threaded post, then attach the fixing plate
(B) onto the bottom of the firebowl body (A)
using four M4 screws (AA).
Be sure to tighten securely.
2
. Attach the tank bracket (F) to angle
bracket (C) using two M4 screws (AA) .
3. Insert the body (A) through the umbrella
hole in the table and the tank bracket assembly
made in step 2. Screw the fixing nut (E) to
the body (A) from the underside of the table
to secure the body to the table.
Bond Manufacturing Co., Inc. | Page 6
E
A
C
A
AA
B
AA
F
E