DeWalt DW682 Guide D'utilisation page 5

383956-00,02,DW682 4/21/04
to determine that it will operate properly and perform its intended
function. Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any other conditions that
may affect its operation. A guard or other part that is damaged
should be properly repaired or replaced by an authorized service
center unless otherwise indicated elsewhere in this instruction
manual. Have defective switches replaced by authorized service
center. Do not use tool if switch does not turn it on and off.
CAUTION: Wear appropriate hearing protection during use.
Under some conditions and duration of use, noise from this product
may contribute to hearing loss.
WARNING: Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains chemicals known to
cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry
products, and
• arsenic and chromium from chemically-treated lumber (CCA).
Your risk from these exposures varies, depending on how often you do
this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such
as those dust masks that are specially designed to filter out
microscopic particles.
• Avoid prolonged contact with dust from power sanding,
sawing, grinding, drilling, and other construction activities.
Wear protective clothing and wash exposed areas with soap
and water. Allowing dust to get into your mouth, eyes, or lay on the
skin may promote absorption of harmful chemicals.
WARNING: Use of this tool can generate and/or disburse dust,
which may cause serious and permanent respiratory or other injury.
Always use NIOSH/OSHA approved respiratory protection appropriate
for the dust exposure. Direct particles away from face and body.
SAVE THESE INSTRUCTIONS
8:20 AM Page 2
FIG 1
LOCK ON BUTTON
TRIGGER SWITCH
ADJUSTABLE FENCE
ANTI-SLIPPAGE PIN
FIG 2
1/2"
(12.7 mm)
2 3/8"
2 3/16"
(60 mm)
(56 mm)
(flat biscuits) #20
2
AUXILIARY HANDLE
LOCK KNOB
HEIGHT ADJUSTMENT
KNOB
DUST EXHAUST PORT
PLUNGE DEPTH
ADJUSTMENT
KNOB
LOCK KNOB
3/8"
(9.5 mm) 5/16"
(8 mm)
1 13/16"
(46mm)
#10 #0