Publicité
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (JJ) into the large holes in the RIGHT
END (A4) and LEFT END (B3).
Repeat this step for the LARGE BACK (D) and BOTTOM (E2).
å
(12 used)
Page 6
Do not tighten the TWIST-LOCK® FASTENERS in this step.
JJ
B3
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
A4
102702
www.sauder.com/services
Publicité
