Publicité
Step 6
Step
Fasten the LEFT END (B3) to the TOP (C3). Tighten two
å
TWIST-LOCK® FASTENERS.
Fasten the LARGE BACK (D) to the LEFT END (B3).
å
Tighten two TWIST-LOCK® FASTENERS.
Fasten the BOTTOM (E2) to the LEFT END (B3). Tighten
å
two TWIST-LOCK® FASTENERS.
Surface with TWIST-LOCK® FASTENERS
www.sauder.com/services
These holes must be here.
B3
D
2nd
How to use the SAUDER TWIST-LOCK
1. Insert the dowel end of the FASTENER into the hole of the
adjoining part.
NOTE: The dowel end of the FASTENER must remain fully
inserted in the hole of the adjoining part while locking
the FASTENER.
2. Tighten the FASTENER with a Phillips screwdriver as tight
as possible.
1st
J
E2
3rd
102702
®
FASTENER
Dowel end
G
C3
Page 11
Publicité
