Fitting The Dvd-Rom - NAMCO TIME CRISIS III SD Manuel De L'opérateur

4-6

Fitting the DVD-ROM

The DVD-ROM must be inserted with the game power ON. To prevent electric shock,
accident or injury, do not touch any parts other than those specified below.
1. Remove the rear panel from the Monitor Cabinet.
2. Pull the actuating button of the Interlock Switch to turn the game ON.
3. Press the Eject button of the DVD-ROM drive to eject the tray.
Note: The tray will automatically retract after approx 10 seconds.
PCB Assy
4. Place the DVD-ROM, (label side up), on to the tray.
5. Press the Eject Button to retract the tray.
PCB Assy
6. Switch the power to the game OFF.
7. Refit the rear panel to the Monitor Cabinet.
8. Switch the power to the game ON to commence game operation.
DVD-ROM Drive
Indicator
Lamp
Eject Button
DVD-ROM
Tray
Page 41