Fitting The Pedal Assemblies - NAMCO TIME CRISIS III SD Manuel De L'opérateur

4-5

Fitting the Pedal Assemblies

1. Connect the connector and fit the Pedal Assy to the brackets, taking care not to
trap the wires, with 4off security screw (M5x12), ensuring that the Pedal Assy is
fully down to the floor.
Security screw
(M5x12)
2. Fully tighten all security screws (M5x12)
Connector
Security screw (M5x12)
Pedal Assy
Page 40
Gun Tower Assy