Changing the Brightness
of the Front Panel
There are four levels of brightness for the front
panel display.
Adjust the brightness according to your room's
lighting conditions.
The default setting is "DIMMER OFF."
ENTER
X/x
1
Press AMP MENU.
Set the function of the remote to DVD, and
then press AMP MENU.
2
Press X/x repeatedly until "DIMMER"
appears in the front panel display, then
press ENTER.
3
Press X/x to change the brightness,
then press ENTER or AMP MENU.
x DIMMER OFF
The front panel display, the MULTI CHANNEL
DECODING indicator, and DISC indicators are
brightly lit.
x DIMMER 1
The front panel display, the MULTI CHANNEL
DECODING indicator, and DISC indicators are
half lit.
x DIMMER 2
The front panel display, the MULTI CHANNEL
DECODING indicator, and DISC indicators are
dimly lit.
US
72
x DISP OFF
Turns off the front panel display, the MULTI
CHANNEL DECODING indicator and the
DISC indicators.When the receiver accepts an
incoming remote signal, it lights for 5 seconds at
DIMMER 2 brightness.
Each time you change the setting, the brightness
of the front panel display changes as follows:
DIMMER OFF t DIMMER 1 t DIMMER 2
t DISP OFF t DIMMER OFF...
AMP MENU