Getting Started; Unpacking; Inserting Batteries Into The Remote - Sony AVD-C700ES Mode D'emploi

Getting Started

Unpacking

Check that you have the following items:
• AM loop antenna (1)
• FM wire antenna (1)
• S Video cord (1)
• Remote Commander (remote) RM-CL700M
(1)
• R6 (size AA) batteries (2)
• Operating instructions (1)
Inserting Batteries into
the Remote
You can control the receiver using the supplied
remote. Insert two R6 (size AA) batteries by
matching the 3 and # ends on the batteries to
the markings inside the compartment. When
using the remote, point it at the remote sensor
on the receiver.
For details of remote operation, see "Using the
Remote" on page 62.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from
the sun or lighting apparatus. Doing so may cause a
malfunction.
• If you do not use the remote for an extended period of
time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
• When you operate the receiver, select DVD or
TUNER in the remote's display. For details, refer to
"Using the remote" (page 62).
US
13