AVer DL30 Manuel D'utilisation page 37

Preset
Set up preset position and view preset position.
1. Select the "Preset" tab in Camera Settings interface.
2. Use ,
3. Enter preset position number (0~255) in Save Preset column and select "Save" to save the
position.
4. To call the preset position, enter a preset number (0~255) in Load Preset column or select the
preset number (0~19) from Quick Call section.
5. Video Freeze while Preset: turns on/off the screen view freeze function. When "Video Freeze
while Preset" is on, during the preset operation, the screen will freeze until the operation is done.
6. Preset Speed: selects the preset speed.
[Note] Preset point value includes: pan/tilt/zoom, exposure, shutter, iris, ev, brightness, gain, slow
shutter, white balance, focus, focus position, digital zoom, and R&B gain.
Exposure
Select the "Exposure" tab in camera settings interface.
Set up the exposure type - Full Auto or Manual and relevant settings.
, , and to adjust camera view position.
28